1079-2 : BNC

BNC Female to K-Loc Male Adapter

Winchester’s KINGS® brand 50 Ohm BNC series RF connectors are the most popular miniature size connectors for coaxial cables from .150″ to .250″ OD. However, designs accommodate .078″ to .437″ cables. The BNC connector is a 50 Ohm constant impedance connector with a frequency range of 0 to 4 GHz. Coupling is a quick connect/disconnect bayonet, particularly useful in test equipment, and is weatherproof. Items qualified to MIL-PRF-39012 are included in the listings and also appear on the latest QPL list for MIL-PRF-39012.
Read More >
Need Help? Talk to our Experts
We recommend that you confirm the precise technical information presented on the website with an engineer before designing into your application. Read disclaimer.
Disclaimer
While the information presented within our website is believed to be accurate and reliable, all data presented is subject to change without notice. Winchester Interconnect Corporation disclaims responsibility for any damages resulting from application or any incompleteness or inaccuracies in the information presented. Please contact us at 203-741-5400 for specific information on the latest design options and specifications.
Specifications Technical Resources Case studies
Specifications
Military Part Number
-
NSN Part Number
-
Body Plating
-
Cable Part Number
-
Cable Procedure
-
Cable Type
-
Center Contact Plating
-
Connector Only
-
Crimp Die
-
Crimp Tool
-
Gender
-
Military Part Category
-
Non Magnetic
-
OD
-
Orientation
Straight
Plating
-
QPL/Non QPL
Non-QPL
Reference Standard
-
Termination Type
-
Type
Adapter
Downloads
  • Triple Shielded Cable Solution

    A customer approached Winchester Interconnect looking to improve the performance of its RF cables. The cables were used in automated test equipment where electromagnetic interference (“EMI”) was high. In addition, its assembly technicians complained that routing standard, double- shielded RF cable through its test system was difficult and would lead to delays in production.

    Download Case Study
  • Low Insertion Loss Semi-rigid SMP Cable Assembly

    Winchester was asked to evaluate cable assemblies that failed to consistently meet the customer’s expected performance levels. The customer manufactured the assemblies in-house using purchased MIL Spec SMP Right-Angle solder type cable connectors with a standard bifurcated center contact. The customer selected 0.047 semi-rigid cable with 69.5 VoP solid PTFE dielectric. Coupling the connector and cable with the quality assembly work from experienced operators, the customer should have been able to meet the required performance criteria. However, despite its best efforts the customer could not reliably pass a 0.70 dB Insertion Loss and 1.35:1 VSWR @ 20 GHz requirement. This inconsistency was causing critical disruptions in manufacturing.

    Download Case Study
Need Help?
Need Help? Talk to our experts
Dave Camelio Bio Contact

Need Help?

Talk to our experts

Connecting customers with the right products and technical experts

Technical Experts Business Experts Sales Experts

Dave Camelio

Andy Robinson

Andy Robinson